Steel Tuff End Stay Kits reduce the labour component in most barb and electric fencing applications. Fantastic for cell grazing or remote applications where machinery access is not practical and heavy end posts waste time and damage equipment and backs!
Best of all they are ALL AUSTRALIAN.
With a motorised/pneumatic or hand steel post driver (75NB), the front stay is rammed with holes facing back along the line and the back stay in-line as normal. Slide the appropriate (included) bracket onto each of the weaner posts prior to ramming. One is an end bracket, one a side bracket at 90 degrees. The adjustable, heavy duty cross member stay bolts to the brackets (front post one at top, back post one at the bottom) then once in place and bolted, is simply screwed to titen diagonally across the assembly. For best results, prior to straining the fence, cross wire titen as well from the top of the back post to the bottom of the front post.
This entry level stay kit has strength, safety and speed of application from clever engineering and quality materials (min 15% heavier than equivalent dipped gal "mega posts") with rolled construction for more strength and round edges for safety.
Other sizes available for exclusion fencing, deep cracking clay soils etc.
Includes 1 X 1.8 AND 1 X 2.1m Weaners Posts; 50mm Cross Stay; 2 x brackets.
Additional brackets available for swinging gates (not included in kit) as required.
Bulk pricing available. Post diameter requires minimum 75NB rammer.
Please contact us regarding freight pricing (based on quantities and delivery area).